Yes. We have factory conversion kits available for 4hp engines and above. To convert a tiller model to remote, you will need an S.R.C. kit (the hardware required to create linkage under the cowl) and a control box for throttle and shift (with or without key switch). In addition, if you wish to have remote steering you may require a steering link arm or hook plate. We recommend professional installation by a qualified marine professional. Below is the cost of converting your tiller model outboard to remote control with the required items mentioned above:

4, 5, 6hp = $425 (for use with manual start only; electric not available)
8, 9.8hp = $425 or $475 (for use with manual or electric start)
15, 18, 20hp = $425 or $475 (for use with manual or electric start)
25, 30hp = $425 or $475 (for use with manual or electric start)
40hp = $425 or $475 (for use with manual or electric start)

NOTE: Kits do not include the (2) 33C universal control cables for throttle and shift (these should be purchased locally based on length required). The kit does not include a steering system. We recommend that you purchase a steering system locally based on the length required by your application. (the cost will vary locally, but generally will cost about $200-250 for these items)