NO SHIPPING FOR 20HP REMOTE CONTROL MODELS PER NISSAN:

Remote Steering/Control models may NOT be shipped due to manufacturer restrictions and must be installed on your boat at our Cookeville, TN location. Prices below are for remote models and include taxes and installation. Contact us to purchase and schedule an appointment for installation.

Alternative Option:

Tiller-To-Remote Conversion Kits: Nissan does permit the shipment of 20hp tiller handle (hand driven) models. Tiller models can be converted to remote control by purchasing a tiller-to-remote conversion kit. (more info)

2012 Nissan 20 hp 4-Stroke Outboard (Power Tilt)

Model # NSF20CEPT1
All 20hp models
Shaft Length: 15" (Short)
Drive Type: Remote Control
Starting: Electric Start
Weight: 134 lbs
What's Included:
  • • 3.1 Gallon Fuel Tank/Line
  • • Aluminum Propeller
  • • Side Mount Control Box
  • • Throttle/Shift Cables (33C)
  • • Owner's Manual & Tool Kit

Total Price: $3950.00
Price Includes:
  • 3 Year Mfg. Warranty
  • Sales Tax (included in price)
  • Turn-Key Installation
    (at our Cookeville, TN location)

Included Features

  • Electric Start with 12V 145W 12A Alternator
  • Full Thru-Cowl Manual Start Retained
  • Advanced Digital CD Ignition System
  • Cross Flow Induction System
  • Power Tilt (on control box and engine)
  • Side Mount Control Box (reversible handle)
  • 33C Throttle/Shift Cables (length as required)
  • High Grade Marine Alloy Construction
  • Thermostatically Controlled Cooling
  • Stainless Steel Water Pump Housing
  • Zinc Coated Water Passages
  • Sacrificial Zinc Anodes + Trim Tab
  • Tuned Intake for Crisp Acceleration
  • Carburetor Accelerator Pump
  • Quiet Through-the-Propeller Exhaust
  • Start-In-Gear Protection
  • Low Oil Pressure Warning System
  • ESG Over Rev RPM Limiter
  • Easy to Replace Canister Style Oil Filter
  • 3.1 Gallon Fuel Tank / Fuel Line
  • Safety Lanyard Cut-Off Switch
  • Operating Manual & Emergency Tool Kit
  • Nissan Marine 3-Year Warranty

Specifications

Nissan Marine Outboards
Nissan Marine 3-Year Warranty
EPA Standard Meets or exceeds all Federal
EPA emission standards
California C.A.R.B California C.A.R.B.
three star rating
for ultra low emissions
Engine Type: 20hp, 4-Stroke, 2-Cylinder, SOHC
Displacement: 351 cc (21.41 cubic inches)
Bore and Stroke: 61 x 60 mm (2.40 x 2.36 inches)
Full Throttle RPM Range: 5,400-6,100 RPM
Ignition System: Digital CD Ignition
Induction Scavenging: SOHC
Valves per Cylinder: 2
Fuel Delivery: Single Venturi Carburetor w/ Accelerator Pump
Fuel Type: Unleaded Gasoline (87 octane)
Oil Type: SAE 10W-30 or SAE 10W-40 (SF, SG, SH, SJ)
Oil Capacity: 1 Quart (1000 ml)
Lubrication: Wet Sump
Starting System: Electric Start + Back-Up Thru-Cowl Manual Start
Alternator (INCLUDED): 12V 145W 12A (standard on elec. start models)
Cooling System: Water-Cooled, Thermostatically Controlled
C.A.R.B. Rating: Ultra-Low Emission (3-STAR)
Saltwater Rated: YES
Trim/Tilt Positions: 5 trim positions (manual); Power Operated Tilt
Tilt Angle Range: -6° to 75°
Gear Ratio: 2.15:1
Gear Shift: Forward-Neutral-Reverse (Control Box)
Propeller: 9.2" Dia. X 9.8" Pitch 3-Blade Aluminum
Fuel Tank (INCLUDED): 3.1 Gal. Fuel Tank + Quick Connect Fuel Line
Transom Height: 15" Short Shaft (shaft size help)
Weight: 134 lbs (61 kg)

Purchase Info and Restrictions

NO SHIPPING ON REMOTE MODELS
Nissan does not permit the shipment of any remote model engine. This model must be installed at our Cookeville, TN location.
No Exceptions

To purchase and schedule installation click here.

Alternative Option:
Nissan does permit the shipment of tiller handle (hand driven) models. Tiller handle models can be converted to remote by purchasing a tiller-to-remote conversion kit.

For more information on tiller-to-remote conversion kits click here.