Tohatsu/Nissan Outboard Break-In Chart
4-Stroke
Outboards
CAUTION: Four-stroke Tohatsu and Nissan outboards DO NOT come with engine oil already installed. You must add engine oil before attempting to start your four-stroke outboard for the first time. Failure to do so will result in extensive damage to your outboard. For more info see 4-stroke oil type and capacity.
Following the recommended break-in schedule will prolong the life of your new outboard and ensure optimum performance. RPM's should be varied throughout the break-in period without exceeding the maximum RPM limits as shown. We recommend that break-in be performed on the boat (under a proper load). For detailed information on the break-in procedure, please consult your owner's manual.
|
2 & 3.5
hp
|
1-10 min |
10 min-2 hrs |
2-3 hrs |
3-10 hrs |
After 10 hrs |
|
Throttle Position |
Idle |
Less than 1/2 throttle |
Less than 3/4 throttle |
Up to 3/4 throttle |
Full throttle available |
|
Max. RPMs |
|
Approx.
3000 |
Full throttle run allowed for 1 min every 10 min |
Approx. 4000 rpm max with Full throttle run allowed for 2 min every 10 min |
|
|
4-5-6
hp
|
1-10 min |
10 min-2 hrs |
2-3 hrs |
3-10 hrs |
After 10 hrs |
|
|
Throttle Position |
Idle |
Less than 1/2 throttle |
Less than 3/4 throttle |
Up to 3/4 throttle |
Full throttle available |
|
|
Max. RPMs |
|
Approx.
3000 |
Full throttle run allowed for 1 min every 10 min |
Approx. 4000 rpm max with Full throttle run allowed for 2 min every 10 min |
|
|
|
||||||
|
8-20 hp |
1-10 min |
10 min-2 hrs |
2-3 hrs |
3-10 hrs |
After 10 hrs |
|
|
Throttle Position |
Idle |
Less than 1/2 throttle |
Less than 3/4 throttle |
Up to 3/4 throttle |
Full throttle available |
|
|
Max. RPMs |
|
Approx.
3000 |
Full throttle run allowed for 1 min every 10 min |
Approx. 4000 rpm max with Full throttle run allowed for 2 min every 10 min |
|
|
|
||||||
|
25-30
hp
|
1-10 min |
10 min-2 hrs |
2-3 hrs |
3-10 hrs |
After 10 hrs |
|
|
Throttle Position |
Idle |
Less than 1/2 throttle |
Less than 3/4 throttle |
Up to 3/4 throttle |
Full throttle available |
|
|
Max. RPMs |
|
Approx.
3000 |
Full throttle run allowed for 1 min. every 10 min. |
Approx. 4000 rpm max with Full throttle run allowed for 2 min every 10 min |
|
|
|
||||||
TLDI
(Direct Injection) Outboards
TLDI
models are direct fuel injection 2-strokes (no
carburetors), therefore, break-in procedures will vary
from a standard carbureted 2-stroke outboard.
|
25-50
hp |
1-10 min |
10 min-1 hrs |
1-2 hrs |
2-10 hrs |
After 10 hrs |
|
|
Throttle Position |
Idle |
Less than 1/2 throttle |
Less than 3/4 throttle |
Up to 3/4 throttle |
Full throttle available |
|
|
Max. RPMs |
Approx.
3000 |
Full throttle run allowed for 1 min every 10 min |
Approx. 4000 rpm max with Full throttle run allowed for 2 min every 10 min |
|||
|
||||||
|
70-115
hp |
1-10 min |
10 min-1 hrs |
1-2 hrs |
2-10 hrs |
After 10 hrs |
|
|
Throttle Position |
Idle |
Less than 1/2 throttle |
Less than 3/4 throttle |
Up to 3/4 throttle |
Full throttle available |
|
|
Max. RPMs |
Approx.
3000 |
Full throttle run allowed for 1 min every 10 min |
Approx. 4000 rpm max with Full throttle run allowed for 2 min every 10 min |
|||
|
||||||



